- Product Introduction
- A periodic and reciprocating feeding machine for large bulk materials
- Product improvement
- According to user requirements, the motor can be changed to the speed adjustment motor to adjust the feeding volume.
Simple structure, even feeding, good continues performance
Change and control flow and feeding volume at any time
Stable transmission, high efficiency
Compact structure, reasonable design
Excellent quality, wide application
The machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals.
The chute feeder is used to convey mineral lump from storage silo to equipment in industries like smelting, mining, chemical, building material, concentrating and coal, etc.
|Model||Outlet Dimension (W X H) (mm)||Max. Feed Size (mm)||Feed Capacity (t/h)||Motor Model||Motor Power
|CG300X300||300X300||50||10~20||Y90L- 4||1. 5||265|
|CG400X400||400 X400||100||10~30||YCT160-4A||2. 2||640|
|CG600X500||600 X500||200||10~50||Y112M- 4||4||1045|
|CG1240X980||1240X980||350||36~90||Y160M- 6||7. 5||1710|